A few months back my mum mentioned she was looking for a new bedside lamp to grace the guest room at her beach house.
Well, actually, that’s not entirely accurate. When I say “looking for” I really mean “dreaming up”, and when I say “new” I really mean “not new at all” because, like me, she has the same weird can’t-leave-well-enough-alone-or-just-buy-stuff-from-a-store-like-most-regular-people disease.
Anyways, her plan was to simply combine two elements she already owned; an inexpensive lantern and a complete lamp cord. Yep, two basic items anyone can get their hands on!
And when I say “simply combine” I really do mean just that! Truly ruly, this is one of the easiest DIY lamps ever. It’s also super affordable, completely one-off and the possibilities are almost endless! Oh, and did I mention the absence of any wiring?
You only need three ingredients…
We used a rustic wooden lantern that was found at a discount variety store a few years ago for just $8. Although we used a lantern you could use almost anything with an appropriate form (as long as it’s safe to use as a lamp – remember, some light bulbs can get pretty hot). I’m liking the idea of a cute wooden birdhouse!
If possible, use something with a raised base to allow space for the socket flange and to provide a feed for the cord (demonstrative photos below). Of course, if you can’t find something raised, you could always add your own little feet/apron or consider the option of hollowing out certain areas (if possible).
Did you know you can buy wire-free DIY lamp cords? Whilst we used a cord from an old Ikea MYLONIT lamp (this was a really cheap self-assemble lamp with a complete cord which was entirely independent of the actual lamp form – now discontinued) Ikea still sells super affordable similar lamps with all-in-one cords which would work just as well for a project like this (check out the LATER, KVARNA and KAJUTA).
Note: As an alternative to the Ikea lamp cords, you could try a plug-in pendant cord though they can be pretty pricey (up to $60) and may not be as well suited for this type of use. I know there are lots of really affordable lamp kits available in the US (and I’ve also just discovered you can actually buy separate cord sets from US Ikea stores) though I think due to legalities they are pretty much non-existent here in Australia. I found using the Ikea lamps to be the best option.
We used a little 15 watt pilot bulb (available at supermarkets or hardware stores) which, for whatever reason, I think compliments the subtle nautical style of the lantern. It’s low wattage also emits just the right amount of warm light given it’s shining through clear glass. Of course, you could get fancy with a more decorative filament bulb or use a traditional candle-shaped one.
To convert the lantern into a lamp…
ONE Make a hole in the base of your lantern.
This needs to be large enough to accommodate the socket, though not so large that the flange fits through (refer to diagram below). The flange needs to be ‘caught’ by the underside of the lantern so the socket can be properly secured.
In the case of our old Ikea spring-loaded lamp cord, we had a little room for error in terms of hole size as the circumference of the flange was quite a bit larger than that of the socket. The newer Ikea lamp cords however require a little more precision as the difference in size between the flange and socket isn’t as generous…
That said, for greater ease or to correct any oh-oh-I-made-the-hole-too-big mistakes, you could always use a washer to fake a larger base area.
To create our hole we used a hole saw bit (as can be seen above) though there are lots of ways to go about it. A spade bit (if you have a large enough one) or a multi-tool are just two alternatives.
Note: These methods for creating the hole should work for metal too – as long as the cutting bits are good quality and sharp. Getting through might just take a little longer.
TWO Paint the socket sleeve (thanks for being my hand model mum!).
This just helps disguise the plastic look of it. We went with basic matte black, though you could opt for a trendy colour pop or faux metal finish. You could also choose to conceal the sleeve once in place – I contemplated wrapping it in twine, fine rope or even a sleeve of metallic card, though decided it wasn’t really necessary. I actually quite like the simplicity of it.
THREE Feed the socket through the hole and insert your bulb – DONE!
Obviously I took the above demonstrative spring arm photo before I painted the socket sleeve!
In our case, this meant squeezing up the spring-loaded arms and inserting the socket from the underside before allowing the arms to snap back, securing the socket in place. If you are using one of the newer Ikea lamp cords, this would simply involve inserting the socket from the underside then screwing down the plastic nut to sandwich the base of the lantern. Essentially, the nut and spring arms serve the same anchoring purpose.
And it really is as simple as that!
Mum now has a totally unique lamp to both compliment and illuminate her beach house guest room – and all for less than $15 and in under fifteen minutes!
I tested the lamp at night and was immediately smitten with its warm glow and shadow cast. The decorative x’s cut the light quite boldly and produce, what is to me, quite an enchanting ambiance.
Below you can see what I mean about the lantern needing some sort of raised base or hollow. There has to be space to accommodate the socket flange and somewhere for the cord to feed out or the whole thing won’t sit level.
As nice as it is to use lanterns with actual candles, this is just a bit of a quirky take which makes for a unique lamp and provides easy one-click radiance.
I know this isn’t really a Christmas project though given the time of year I thought I’d style it a bit festively.
Since creating this lamp I’ve found my eyes lingering longer over every lantern (slash hollow object) I come across. Do you ever do that too? Get so excited about the possibilities of a project that you just want to make more and more for no good reason? Fortunately stuff like this can make pretty cute one-of-a-kind gifts!
Hope everyone’s Christmas preps are going well :-)
On-December 10, 2014
By- Kristine, The Painted Hive